1. The computer reinstalls the system, but it has been stuck there. There are the following reasons and solutions.If the system image file is incomplete or damaged, it may not be downloaded completely when downloading, or the file is damaged when downloading, so that it will be stuck during installation. The solution is to re-download and download it to other system websites.
2. If there is no problem, it may be that the data cable of the hard disk is of poor quality or poor contact, which may lead to it. Note that first, replace the hard disk data cable and plug it into the motherboard, or change the two ends of the cable. If it still doesn't work, change the root line to test.
3. Generally, if the computer configuration is too low, it is possible to reinstall the system for the computer for 4 hours, so wait slowly. If you use a CD-ROM to install the system, in this case, it is generally that the CD-ROM has been damaged. It is recommended to replace the system CD-ROM and reinstall it.
1. Turn off unnecessary programs and services: During the installation of the Win10 system, turning off other unnecessary programs and services can reduce the use of system resources, thus speeding up the installation. Check hardware devices: During the installation process, some hardware devices may be incompatible or driver problems, resulting in system installation jams.
2. Reset the function of this computer: reinstall the Windows 10 system automatically once, and you can choose whether to keep the existing software, applications and data. Going back to the previous version means that if you install win10 through the "upgrade" method, you can directly return to the system before the upgrade.
3. The solution is as follows; restart the computer and press and hold F8 to enter the latest correct configuration. Generally, under the latest system operation. You can enter the system normally. But after testing, it still can't enter the operating system.
If you use a CD-ROM to install the system, in this case, it is generally that the CD-ROM has been damaged. It is recommended to replace the system CD-ROM and reinstall it.If you use a USB flash drive to install this situation, it is generally that there is a problem with the system made by the USB flash drive. Download another system and try it.
If there is a USB flash drive or card reader, dial the USB flash drive and card reader, then check the optical drive, and dial the data cable and power cable of the optical drive. Then it's the hard disk. You can unplug the hard disk first and start the computer to see the boot screen.
It may not be downloaded completely when downloading, or the file is damaged when downloading, so it will be stuck during installation. The solution is to re-download and download it to other system websites. There are bad channels on the installation disk. Whether it is installed with a USB flash drive, CD-ROM, or hard disk, there may be bad channels, causing the installation to be stuck.
The computer reinstall system is stuck. Try the following method: First, it is recommended to restart, and then continue the installation. Generally, it can be passed.If the first step fails, it is recommended to replace another version of the system disk for installation. If the above two steps fail, you need to troubleshoot according to the situation.
bingo plus update today Philippines-APP, download it now, new users will receive a novice gift pack.
1. The computer reinstalls the system, but it has been stuck there. There are the following reasons and solutions.If the system image file is incomplete or damaged, it may not be downloaded completely when downloading, or the file is damaged when downloading, so that it will be stuck during installation. The solution is to re-download and download it to other system websites.
2. If there is no problem, it may be that the data cable of the hard disk is of poor quality or poor contact, which may lead to it. Note that first, replace the hard disk data cable and plug it into the motherboard, or change the two ends of the cable. If it still doesn't work, change the root line to test.
3. Generally, if the computer configuration is too low, it is possible to reinstall the system for the computer for 4 hours, so wait slowly. If you use a CD-ROM to install the system, in this case, it is generally that the CD-ROM has been damaged. It is recommended to replace the system CD-ROM and reinstall it.
1. Turn off unnecessary programs and services: During the installation of the Win10 system, turning off other unnecessary programs and services can reduce the use of system resources, thus speeding up the installation. Check hardware devices: During the installation process, some hardware devices may be incompatible or driver problems, resulting in system installation jams.
2. Reset the function of this computer: reinstall the Windows 10 system automatically once, and you can choose whether to keep the existing software, applications and data. Going back to the previous version means that if you install win10 through the "upgrade" method, you can directly return to the system before the upgrade.
3. The solution is as follows; restart the computer and press and hold F8 to enter the latest correct configuration. Generally, under the latest system operation. You can enter the system normally. But after testing, it still can't enter the operating system.
If you use a CD-ROM to install the system, in this case, it is generally that the CD-ROM has been damaged. It is recommended to replace the system CD-ROM and reinstall it.If you use a USB flash drive to install this situation, it is generally that there is a problem with the system made by the USB flash drive. Download another system and try it.
If there is a USB flash drive or card reader, dial the USB flash drive and card reader, then check the optical drive, and dial the data cable and power cable of the optical drive. Then it's the hard disk. You can unplug the hard disk first and start the computer to see the boot screen.
It may not be downloaded completely when downloading, or the file is damaged when downloading, so it will be stuck during installation. The solution is to re-download and download it to other system websites. There are bad channels on the installation disk. Whether it is installed with a USB flash drive, CD-ROM, or hard disk, there may be bad channels, causing the installation to be stuck.
The computer reinstall system is stuck. Try the following method: First, it is recommended to restart, and then continue the installation. Generally, it can be passed.If the first step fails, it is recommended to replace another version of the system disk for installation. If the above two steps fail, you need to troubleshoot according to the situation.
146.84MB
Check689.92MB
Check592.77MB
Check965.47MB
Check763.54MB
Check776.79MB
Check649.52MB
Check176.15MB
Check542.23MB
Check272.52MB
Check243.13MB
Check688.49MB
Check326.92MB
Check498.22MB
Check793.11MB
Check428.76MB
Check844.91MB
Check476.22MB
Check466.64MB
Check462.41MB
Check138.44MB
Check822.82MB
Check283.67MB
Check292.45MB
Check732.66MB
Check287.18MB
Check895.55MB
Check818.39MB
Check132.64MB
Check931.57MB
Check852.48MB
Check261.99MB
Check198.44MB
Check588.53MB
Check372.21MB
Check384.49MB
CheckScan to install
bingo plus update today Philippines to discover more
Netizen comments More
1439 Champions League
2025-01-09 12:10 recommend
2115 DigiPlus stock
2025-01-09 11:01 recommend
2759 Hearthstone arena deck Builder
2025-01-09 10:38 recommend
2569 UEFA live free
2025-01-09 09:55 recommend
282 Casino redeem
2025-01-09 09:52 recommend